Skip Navigation LinksHome -> Products -> Transducers -> M100 Power Range  

M100 specification

Working temperature 0 to +60 °C
Functional temperature -25 to +70 °C
Storage temperature -55 to +85 °C
Temperature coefficient 0.02% per °C (100ppm/°C)
Relative humidity 95% non condensing
Class of climate HSE complying with DIN40040-3 complying with VDE/VDI3540

Class ±0.2 % complying with IEC688
Calibration temperature 23°C
Temperature coefficient 0.01% / °C (100 ppm / °C)
Stability 0.05 % per annum non cumulative
Warm up time <15 min

Rated value
See individual product pages.

Load resistance (current output)
1mA <15 kOhm
5mA <3 kOhm
10mA <1.5 kOhm
20mA < 0.75kOhm
4-20mA < 0.75kOhm
Load resistance (voltage output)
1V, 5V & 10V >1 kOhm
(M100-VA1,VA3) 1V, 5V & 10V > 50kOhm 

Load influence < 0.1 %
Ripple < 0.5% peak-peak at full load
Response time < 200 ms for 0-99 % at full load
Overload < 2 x rated value at full load
No load voltage < 27 V

U.L. Approval File No E157034
Test Voltage:
4kV RMS 50Hz 1min. between Input/Case/Auxiliary/Output
Impulse Test:
EMC 5kV transient complying with IEC801/EN55020
HF interference:
EHF 2.5kV 1MHz complying with IEC255-4
Class II complying with IEC348 BS4753/DIN57411/VDE 0411

Fixing - Snap on to DIN rail 35 x 7.5 mm complying with DIN-EN50022 BS5584
Mounting - Any position
Enclosure Code - Case IP50/terminals IP30 complying with IEC529 BS5490 DIN40050

Applied Standards
General IEC688/BS6253/VDE/VDI2192
Safety EN61010-1 DIN57411/VDE0411 ANSI C37
Surge withstand IEC801/EN55020 ANSI C37-90a
Radio screening RFI degree N complying with VDE0875
EMC Emissions EN61326-1
Immunity EN61326-2